CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
Net::CIDR::Set versions through 0.20 for Perl did not validate IP addresses
Net::CIDR::Set versions through 0.20 for Perl did not validate IP addresses. The add method called the _encode method to parse addresses. If the addresses did not look like netmasks or network ranges, then they were assumed to single IP addresses and passed back to itself as a 32-bit or 128-bit netmask. If the argument was not a well-formed IP address, then this would lead to indefinite recursion. An attacker could use this to cause a denial of service.
rrwoCWE-1287CWE-674Net::CIDR::Set versions through 0.20 for Perl accept non-ASCII IP addresses and netmasks
Net::CIDR::Set versions through 0.20 for Perl accept non-ASCII IP addresses and netmasks. Unicode digits such as the Arabic-Indic One (U+0661) were accepted but not properly parsed as numbers. This could allow network masks to accept larger networks.
rrwoCWE-1289Etsy::StatsD versions through 1.002002 for Perl allow metric injections
Etsy::StatsD versions through 1.002002 for Perl allow metric injections. The metric names and values are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. Note that the git repository contains an unreleased version with the gauge and set methods that also do not check for potential metric injections.
sanbegCWE-93Net::Statsd versions before 0.13 for Perl allow metric injections
Net::Statsd versions before 0.13 for Perl allow metric injections. The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. The update_stats (used for updating counters) and gauge methods do not check that values are numeric (which would block metric injection).
cosimoCWE-93Improper Authentication (Authentication Bypass) exists in Neterbit NW-431F Router 20241014-IR03 and before
Improper Authentication (Authentication Bypass) exists in Neterbit NW-431F Router 20241014-IR03 and before. The router uses a weak/predictable cookie value for authentication. By modifying the cookie value (e.g., setting it to "admin"), an attacker can bypass the authentication schema and gain unauthorized access to admin functionalities.
CWE-384Improper Access Control, Missing Authorization vulnerability in Kurt Software Studio WriteUp Mobile App allows Accessing Functionality No...
Improper Access Control, Missing Authorization vulnerability in Kurt Software Studio WriteUp Mobile App allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects WriteUp Mobile App: from 1.3.0 through 04062026.
CWE-284CWE-862An issue was discovered in OpenStack oslo.messaging 1.0.0 through 17.3.0
An issue was discovered in OpenStack oslo.messaging 1.0.0 through 17.3.0. The oslo.messaging RabbitMQ driver does not perform TLS hostname verification when connecting to the message broker. When ssl_ca_file is configured, the driver enables certificate chain validation but does not pass the expected broker hostname into the underlying TLS stack. Any certificate signed by the deployment CA is accepted regardless of hostname, allowing an attacker who can intercept control-plane traffic to impersonate the RabbitMQ broker and perform a man-in-the-middle attack on RPC and notification traffic. All OpenStack services using oslo.messaging with RabbitMQ over TLS are affected.
CWE-297Tautulli is a Python based monitoring and tracking tool for Plex Media Server
Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Versions prior to 2.17.1 expose a public `/image/<hash>` route that resolves attacker-controlled entries from `image_hash_lookup` and replays them through the same server-side image fetch logic used by authenticated image proxying. A low-privilege guest user can seed a malicious external image URL into this lookup table and then trigger server-side fetches through a fully unauthenticated endpoint. This turns an authenticated SSRF primitive into a persistent unauthenticated SSRF gadget. Once the malicious hash entry exists, any external user can request `/image/<hash>.png` and cause the PMS or Tautulli host to fetch an arbitrary attacker-chosen URL. Version 2.17.1 patches the issue.
CWE-918Tautulli is a Python based monitoring and tracking tool for Plex Media Server
Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Versions prior to 2.17.1 expose `configUpdate` as a state-changing administrator endpoint, but the route does not enforce `POST` and does not use any anti-CSRF token. In the default form and JWT-based authentication mode, the administrator session cookie is issued with `SameSite=Lax`, which still permits top-level cross-site navigation requests. An attacker can exploit this by luring a logged-in administrator to a malicious page that submits a cross-site request to `/configUpdate` and overwrites the local administrator username and password. The attacker can then sign in directly with the chosen credentials and take over the Tautulli administrative interface. Version 2.17.1 patches the issue.
CWE-352Tautulli is a Python based monitoring and tracking tool for Plex Media Server
Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Versions prior to 2.17.1 expose `log_js_errors` to any authenticated user, including guest users when guest access is enabled. The endpoint writes attacker-controlled strings directly into the main application log. The administrator-only `logFile` view then reads that log file and embeds it into an HTML response without escaping. This creates a stored cross-site scripting condition where a low-privilege guest can inject HTML or JavaScript into the log file and have it execute in an administrator's browser when the log viewer is opened. Version 2.17.1 patches the issue.
CWE-79OpenTelemetry-Go is the Go implementation of OpenTelemetry
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 and 1.44.0 fix the issue.
CWE-789LIBPNG is a reference library for use in applications that process PNG (Portable Network Graphics) raster image files
LIBPNG is a reference library for use in applications that process PNG (Portable Network Graphics) raster image files. In version 1.8.0, three inter-frame chunk discard paths in the push-mode APNG parser clear the chunk-header flag without consuming the chunk body and CRC, allowing attacker-controlled bytes inside an ignored ancillary chunk to be reinterpreted as a fresh chunk header on the next call to `png_process_data`. Commit faf06924688b62d7c1654b5ceddedbde66ffadb4 fixes the issue.
CWE-436bacnet_stack 1.3.1 contains an Out-of-bounds Read in bacnet_tag_number_decode which allows attackers to cause a denial of service
bacnet_stack 1.3.1 contains an Out-of-bounds Read in bacnet_tag_number_decode which allows attackers to cause a denial of service.
CWE-125GNCC GP5 v7.1.76 was discovered to utilize a weak hashing algorithm to protect the root password, possibly allowing attackers to obtain r...
GNCC GP5 v7.1.76 was discovered to utilize a weak hashing algorithm to protect the root password, possibly allowing attackers to obtain root credentials and privileges via a bruteforce attack.
CWE-328A vulnerability was found in LakshayD02 Hostel-Management-System-PHP up to f87e67c283bab6f718faf2fec6ae39a13bd7036b
A vulnerability was found in LakshayD02 Hostel-Management-System-PHP up to f87e67c283bab6f718faf2fec6ae39a13bd7036b. This issue affects some unknown processing of the file hostel/index.php of the component Admin Dashboard Page. The manipulation of the argument ID results in missing authorization. The attack can be launched remotely. The exploit has been made public and could be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.
CWE-862CWE-863A vulnerability has been found in milvus-io milvus up to 2.6.13
A vulnerability has been found in milvus-io milvus up to 2.6.13. This vulnerability affects unknown code of the file internal/metastore/kv/rootcoord/kv_catalog.go of the component Grantee ID Hash Handler. The manipulation leads to use of weak hash. The attack needs to be performed locally. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 3d932f1c3e065351c4440c27abe1e6479752544d. Applying a patch is the recommended action to fix this issue.
milvusCWE-327CWE-328A flaw has been found in LMCache up to 0.4.6
A flaw has been found in LMCache up to 0.4.6. This affects the function hex_hash_to_int16 of the file lmcache/integration/vllm/utils.py of the component KV Cache Handler. Executing a manipulation can lead to use of weak hash. The attack needs to be launched locally. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance.
CWE-327CWE-328Strawberry GraphQL is a library for creating GraphQL APIs
Strawberry GraphQL is a library for creating GraphQL APIs. In versions 0.172.0 through0.315.6, the MaxAliasesLimiter extension in Strawberry fails to account for the multiplicative/amplification effect of FragmentSpreadNode. While it correctly counts static aliases within the AST it does not consider how many times a fragments internal aliases are expanded during execution. this allows an attacker to bypass alias limits and force the server to resolve and render a significantly higher number of aliases than allowed, potentially leading to a dos via resource exhaustion. Version 0.315.7 contains a fix for the issue.
strawberryCWE-400Strawberry GraphQL is a library for creating GraphQL APIs
Strawberry GraphQL is a library for creating GraphQL APIs. In versions 0.71.0 through 0.315.6, the QueryDepthLimiter extension is vulnerable to an Application-level DOS due to a lack of cycle detection in fragment spreads. When a query contains circular fragment references the determine_depth function enters an infinite recursion, leading to a RecursionError and crashing the validation process. Version 0.315.7 patches the issue.
strawberryCWE-400CWE-674Strawberry GraphQL is a library for creating GraphQL APIs
Strawberry GraphQL is a library for creating GraphQL APIs. In versions 0.288.4 through 0.315.3, Strawberry's bundled GraphiQL template wrote values from the GraphiQL headers editor into the browser URL query string. If a user entered a sensitive header, such as `Authorization: Bearer <token>`, the value could become visible in browser history, copied links, and server/proxy/CDN access logs after a page reload or shared request. Version 0.315.4 patches the issue.
strawberryCWE-200CWE-201
7.5 HIGH
6.5 MEDIUM
9.8 CRITICAL
3.6 LOWWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.