CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix PF driver crash with kexec kernel booting During ...
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix PF driver crash with kexec kernel booting During a kexec reboot the hardware is not power-cycled, so AF state from the old kernel can persist into the new kernel. When AF and PF drivers are built as modules, the PF driver may probe before AF reinitializes the hardware. The PF driver treats the RVUM block revision as an indication that AF initialization is complete. If this value is left uncleared at shutdown, PF may incorrectly assume AF is ready and access stale hardware state, leading to a crash. Clear the RVUM block revision during AF shutdown to avoid PF mis-detecting AF readiness after kexec.
linuxIn the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: clear stale link mapping of ahvif->links_map When an ...
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: clear stale link mapping of ahvif->links_map When an arvif is initialized in non-AP STA mode but MLO connection preparation fails before the arvif is created (arvif->is_created remains false), the error path attempts to delete all links. However, link deletion only executes when arvif->is_created is true. As a result, ahvif retains a stale entry of arvif that is initialized but not created. When a new arvif is initialized with the same link id, this stale mapping triggers the following WARN_ON. WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275 Call trace: ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P) drv_change_vif_links+0xbc/0x1a4 [mac80211] ieee80211_vif_update_links+0x54c/0x6a0 [mac80211] ieee80211_vif_set_links+0x40/0x70 [mac80211] ieee80211_prep_connection+0x84/0x450 [mac80211] ieee80211_mgd_auth+0x200/0x480 [mac80211] ieee80211_auth+0x14/0x20 [mac80211] cfg80211_mlme_auth+0x90/0xf0 [cfg80211] nl80211_authenticate+0x32c/0x380 [cfg80211] genl_family_rcv_msg_doit+0xc8/0x134 Fix this issue by unassigning the link vif and clearing ahvif->links_map if arvif is only initialized but not created. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
linuxIn the Linux kernel, the following vulnerability has been resolved: clk: qcom: gfx3d: add parent to parent request map After commit d22...
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gfx3d: add parent to parent request map After commit d228ece36345 ("clk: divider: remove round_rate() in favor of determine_rate()") determining GFX3D clock rate crashes, because the passed parent map doesn't provide the expected best_parent_hw clock (with the roundd_rate path before the offending commit the best_parent_hw was ignored). Set the field in parent_req in addition to setting it in the req, fixing the crash. clk_hw_round_rate (drivers/clk/clk.c:1764) (P) clk_divider_bestdiv (drivers/clk/clk-divider.c:336) divider_determine_rate (drivers/clk/clk-divider.c:358) clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) __clk_determine_rate (drivers/clk/clk.c:1741) clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) clk_core_round_rate_nolock (drivers/clk/clk.c:1710) clk_round_rate (drivers/clk/clk.c:1804) dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1)) msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51) devfreq_set_target (drivers/devfreq/devfreq.c:360) devfreq_update_target (drivers/devfreq/devfreq.c:426) devfreq_monitor (drivers/devfreq/devfreq.c:458) process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284) worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2)) kthread (kernel/kthread.c:467) ret_from_fork (arch/arm64/kernel/entry.S:861)
linuxIn the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ hand...
In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `extcon` handle, means that the `extcon` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `extcon` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `extcon_set_state_sync()` with a freed `extcon` handle. Which usually crashes the system or otherwise silently corrupts the memory... Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `extcon` handle.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hp...
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: Fix IPv6 inner_thoff desync In nft_inner_pars...
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: Fix IPv6 inner_thoff desync In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization.
linuxOP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using t...
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.
trustedfirmwareCWE-416A Cross Site Scripting vulnerability exists in the Kimi AI v1.0 web interface's 'Preview' feature
A Cross Site Scripting vulnerability exists in the Kimi AI v1.0 web interface's 'Preview' feature. The application fails to properly sanitize or encode HTML/JavaScript payloads generated by the AI model. When a user switches to the 'Preview' tab to view AI-generated code, the malicious payload is rendered directly into the DOM, leading to arbitrary JavaScript execution in the victim's browser session.
CWE-79Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 responds to version.bind CHAOS TXT queries, disclosing the DNS resolver software...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 responds to version.bind CHAOS TXT queries, disclosing the DNS resolver software version (unbound 1.22.0), aiding targeted attacks against known vulnerabilities.
CWE-200Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 contains hardcoded WiFi driver credentials including a RADIUS shared secret, WPS...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 contains hardcoded WiFi driver credentials including a RADIUS shared secret, WPS test key, and default PSK embedded in the production firmware binary.
CWE-1188CWE-798Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 exposes an undocumented /agileconfigreset endpoint that returns internal buffer ...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 exposes an undocumented /agileconfigreset endpoint that returns internal buffer contents to unauthenticated attackers on the adjacent network.
CWE-200Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized internal buffer contents when receiving HTTP ...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized internal buffer contents when receiving HTTP POST requests to undefined paths, exposing server state to unauthenticated adjacent network attackers.
CWE-125Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 enables WPS 2.0 by default with a weak lockout policy (60-second lockout after 1...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 enables WPS 2.0 by default with a weak lockout policy (60-second lockout after 10 attempts).
CWE-1188CWE-307Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized buffer when receiving POST requests without S...
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized buffer when receiving POST requests without SOAPAction header on UPnP port 1900, exposing internal memory to unauthenticated adjacent network attackers.
CWE-200Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 transmits DDNS credentials over plaintext HTTP with only Base64 encoding
Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 transmits DDNS credentials over plaintext HTTP with only Base64 encoding. The firmware contains no TLS implementation, allowing man-in-the-middle interception of DDNS service credentials.
CWE-319CWE-523Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 uses a static authentication nonce that does not change between requests ...
Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 uses a static authentication nonce that does not change between requests from the same source IP. Combined with the predictable XOR-based password encoding (securityEncode function), this allows an attacker to reverse captured authentication tokens to recover the plaintext password.
CWE-327CWE-341Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows UPnP AddPortMapping to forward external ports to the router's own ...
Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows UPnP AddPortMapping to forward external ports to the router's own admin interface by accepting its own IP (192.168.1.1) or localhost (127.0.0.1) as InternalClient. An unauthenticated LAN attacker can expose the admin panel to the internet with a single SOAP request.
CWE-441Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows unauthenticated brute-force attacks via the TDDP password change e...
Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows unauthenticated brute-force attacks via the TDDP password change endpoint (code=10), which lacks the rate limiting applied to the login endpoint (code=7). An attacker on the adjacent network can attempt unlimited passwords without triggering account lockout.
CWE-307Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 encrypts configuration backups with a hardcoded DES key using single DES ...
Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 encrypts configuration backups with a hardcoded DES key using single DES in ECB mode. An attacker who obtains a backup file can decrypt it to recover all stored credentials including admin password, WiFi PSK, and DDNS credentials.
CWE-798Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 is vulnerable to a HTTP denial of service via a low number of crafted inc...
Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 is vulnerable to a HTTP denial of service via a low number of crafted incomplete HTTP requests, causing a persistent crash that requires physical power cycling to recover.
CWE-400
5.5 MEDIUM
7.8 HIGH
9.1 CRITICALWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.