CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free ...
In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation.
In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_...
In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path.
In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_...
In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().
When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) t...
When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell. The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.
freebsdCWE-78ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls
ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges. The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.
freebsdCWE-787A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor
A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object. In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability. The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.
freebsdCWE-416Insufficient Validation of Autoprimary SOA Queries
Insufficient Validation of Autoprimary SOA Queries
powerdnsCWE-400libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become av...
libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024). An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.
freebsdCWE-121MediaArea MediaInfoLib LXF element parsing heap-based buffer overflow vulnerability
MediaArea MediaInfoLib LXF element parsing heap-based buffer overflow vulnerability
mediaareaCWE-823Improper input validation, Unrestricted upload of file with dangerous type vulnerability in Gmission Web Fax allows Remote Code Inclusion
Improper input validation, Unrestricted upload of file with dangerous type vulnerability in Gmission Web Fax allows Remote Code Inclusion. This issue affects Web Fax: from 3.0 before 3.1.
CWE-20CWE-434A time-of-check time-of-use (TOCTOU) condition in the ad_flush function in Netatalk 3.0.0 through 4.4.2 involves root-privileged file ope...
A time-of-check time-of-use (TOCTOU) condition in the ad_flush function in Netatalk 3.0.0 through 4.4.2 involves root-privileged file operations, which may allow a remote attacker to cause limited data modification under specific race conditions.
CWE-367Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to check integration URL for path trav...
Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to check integration URL for path traversal which allows an malicious authenticated user to call an arbitrary API via system admin Mattermost auth token using via path traversal in integration action URL.. Mattermost Advisory ID: MMSA-2026-00640
mattermostCWE-22The setcred(2) system call is only available to privileged users
The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.
freebsdCWE-121A missing break statement in DSI OpenSession processing in Netatalk 1.5.0 through 4.4.2 causes a DSIOPT_ATTNQUANT switch case to fall thr...
A missing break statement in DSI OpenSession processing in Netatalk 1.5.0 through 4.4.2 causes a DSIOPT_ATTNQUANT switch case to fall through into DSIOPT_SERVQUANT, resulting in unintended session option handling that may allow a remote attacker to cause a minor service disruption via crafted DSI session options.
CWE-484Netatalk 2.1.0 through 4.4.2 combines multiple errno values using bitwise OR, resulting in incorrect error codes when multiple error cond...
Netatalk 2.1.0 through 4.4.2 combines multiple errno values using bitwise OR, resulting in incorrect error codes when multiple error conditions occur simultaneously, which may allow a remote attacker to cause a minor service disruption via conditions that trigger incorrect error-handling paths.
CWE-682Netatalk 3.1.2 through 4.4.2 is compiled without FORTIFY_SOURCE, which disables built-in buffer overflow detection at runtime, potentiall...
Netatalk 3.1.2 through 4.4.2 is compiled without FORTIFY_SOURCE, which disables built-in buffer overflow detection at runtime, potentially allowing a remote attacker to cause a minor denial of service via memory errors that would otherwise be caught and safely terminated by runtime protection.
CWE-693A dead bounds check in the Spotlight RPC unmarshaller in Netatalk 3.0.0 through 4.4.2 results in an unreachable code path that provides n...
A dead bounds check in the Spotlight RPC unmarshaller in Netatalk 3.0.0 through 4.4.2 results in an unreachable code path that provides no effective bounds protection, which may allow a remote authenticated attacker to obtain limited information via crafted Spotlight RPC requests.
CWE-561An incorrect calculation in the hextoint macro in Netatalk 2.0.0 through 4.4.2 due to improper uppercase character handling allows a remo...
An incorrect calculation in the hextoint macro in Netatalk 2.0.0 through 4.4.2 due to improper uppercase character handling allows a remote authenticated attacker to cause limited data modification via crafted hexadecimal input.
CWE-682A format string argument mismatch in Netatalk 3.0.3 through 4.4.2 allows a remote authenticated attacker to cause a minor denial of servi...
A format string argument mismatch in Netatalk 3.0.3 through 4.4.2 allows a remote authenticated attacker to cause a minor denial of service via crafted input that triggers incorrect format string processing.
CWE-134Netatalk 2.2.1 through 4.4.2 calls system() after a failed chdir() without properly handling the error condition, which allows a local pr...
Netatalk 2.2.1 through 4.4.2 calls system() after a failed chdir() without properly handling the error condition, which allows a local privileged user to execute unintended commands or cause a minor service disruption under specific conditions.
CWE-78
7.3 HIGH
3.7 LOWWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.