CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If t...
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.
linuxIn the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer tha...
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy.
linuxCWE-787In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions ...
In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.
linuxIn the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() er...
In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().
linuxCWE-415In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several ...
In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: avoid in-place decrypt on shared skb frags MSG_SPLICE_PA...
In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: avoid in-place decrypt on shared skb frags MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(), so later paths that may modify packet data can first make a private copy. The IPv4/IPv6 datagram append paths did not set this flag when splicing pages into UDP skbs. That leaves an ESP-in-UDP packet made from shared pipe pages looking like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW fast path for uncloned skbs without a frag_list and decrypts in place over data that is not owned privately by the skb. Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching TCP. Also make ESP input fall back to skb_cow_data() when the flag is present, so ESP does not decrypt externally backed frags in place. Private nonlinear skb frags still use the existing fast path. This intentionally does not change ESP output. In esp_output_head(), the path that appends the ESP trailer to existing skb tailroom without calling skb_cow_data() is not reachable for nonlinear skbs: skb_tailroom() returns zero when skb->data_len is nonzero, while ESP tailen is positive. Thus ESP output will either use the separate destination-frag path or fall back to skb_cow_data().
linuxCWE-123LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format
LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.74.2 to before version 1.83.7, two endpoints used to preview an MCP server before saving it — POST /mcp-rest/test/connection and POST /mcp-rest/test/tools/list — accepted a full server configuration in the request body, including the command, args, and env fields used by the stdio transport. When called with a stdio configuration, the endpoints attempted to connect, which spawned the supplied command as a subprocess on the proxy host with the privileges of the proxy process. The endpoints were gated only by a valid proxy API key, with no role check. Any authenticated user — including holders of low-privilege internal-user keys — could therefore run arbitrary commands on the host. This issue has been patched in version 1.83.7.
litellmCWE-77CWE-78OpenLearnX is an open-source, decentralized learning and assessment platform
OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to version 2.0.3, a remote code execution (RCE) vulnerability was identified in the OpenLearnX code execution environment, allowing sandbox escape and arbitrary command execution. This issue has been patched in version 2.0.3.
th30d4yCWE-250CWE-284Improper access control in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network
Improper access control in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network.
microsoftCWE-20Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an unauthorized attacker to di...
Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an unauthorized attacker to disclose information over a network.
microsoftCWE-74Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an unauthorized attacker to di...
Improper neutralization of special elements used in a command ('command injection') in M365 Copilot allows an unauthorized attacker to disclose information over a network.
microsoftCWE-138Budibase is an open-source low-code platform
Budibase is an open-source low-code platform. Prior to version 3.35.10, the budibase:auth cookie containing the JWT session token is set with httpOnly: false at packages/backend-core/src/utils/utils.ts:218. JavaScript can read this cookie via document.cookie. This means every XSS becomes a full account takeover — the attacker steals the JWT and has persistent access to the victim's account. The cookie also lacks secure: true (sent over plaintext HTTP) and sameSite attribute. This issue has been patched in version 3.35.10.
budibaseCWE-1004An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with ad...
An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution.
ivantiCWE-20A flaw was found in gnutls
A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems.
CWE-295Wish is an SSH server with defaults and a collection of middlewares
Wish is an SSH server with defaults and a collection of middlewares. From version 2.0.0 to before version 2.0.1, the SCP middleware in charm.land/wish/v2 is vulnerable to path traversal attacks. A malicious SCP client can read arbitrary files from the server, write arbitrary files to the server, and create directories outside the configured root directory by sending crafted filenames containing ../ sequences over the SCP protocol. This issue has been patched in version 2.0.1.
charmCWE-22Memory safety bugs present in Firefox 150.0.1
Memory safety bugs present in Firefox 150.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.2 and Thunderbird 150.0.2.
mozillaCWE-119Memory safety bugs present in Firefox ESR 115.35.1, Firefox ESR 140.10.1 and Firefox 150.0.1
Memory safety bugs present in Firefox ESR 115.35.1, Firefox ESR 140.10.1 and Firefox 150.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2.
mozillaCWE-125CWE-416A flaw was found in gnutls
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.
gnuredhatCWE-170CWE-626Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6
Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6. A crafted request to the router web interface can expose sensitive device and account information. In affected builds, the response may include the administrator password and WLAN PSK, enabling authentication bypass and network compromise. Some firmware versions may expose only partial identifiers (e.g., serial number, ESSID, MAC addresses).
CWE-200Unauthenticated DoS in ZTE H8102E, H168N, H167A, H199A, H288A, H198A, H267A, H267N, H268A, H388X, H196A, H369A, H268N, H208N, H367N, H181...
Unauthenticated DoS in ZTE H8102E, H168N, H167A, H199A, H288A, H198A, H267A, H267N, H268A, H388X, H196A, H369A, H268N, H208N, H367N, H181A, and H196Q. A denial-of-service condition can be triggered against the router's web interface by sending an oversized application/x-www-form-urlencoded POST body. After triggering, the management interface may become unresponsive until the device is rebooted. This may affect any firmware version prior to 2022 (reporter observation). The supplier stated that devices are not vulnerable since 2021-03-23; operator firmware may vary.
CWE-400
7.8 HIGH
9.0 CRITICALWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.