CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
NanoClaw version 1.2.0 and prior contains a host/container filesystem boundary vulnerability in outbound attachment handling and outbox c...
NanoClaw version 1.2.0 and prior contains a host/container filesystem boundary vulnerability in outbound attachment handling and outbox cleanup that allows a compromised or prompt-injected container to read files outside the intended outbox directory by supplying crafted messages_out.id and content.files values or creating symlinked outbox files. Attackers can exploit this vulnerability to trigger host-side reads of arbitrary files and in some cases achieve recursive deletion of paths outside the intended cleanup target.
nanocoCWE-22Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure
Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure. Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation. The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header). The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes.
chornyCWE-340In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Alth...
In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: ntfs: ->d_compare() must not block ..
In the Linux kernel, the following vulnerability has been resolved: ntfs: ->d_compare() must not block ... so don't use __getname() there. Switch it (and ntfs_d_hash(), while we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash() almost certainly can do with smaller allocations, but let ntfs folks deal with that - keep the allocation size as-is for now. Stop abusing names_cachep in ntfs, period - various uses of that thing in there have nothing to do with pathnames; just use k[mz]alloc() and be done with that. For now let's keep sizes as-in, but AFAICS none of the users actually want PATH_MAX.
linuxIn the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrf...
In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.
linuxIn the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on e...
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map.
linuxIn the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_...
In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When...
In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_repor...
In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_han...
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]
linuxIn the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv...
In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing this error pointer to dev_hold() will cause a kernel crash with null-ptr-deref. Instead, silently discard the request. RFC 8335 does not appear to define a specific response for the case where an IPv6 interface identifier is syntactically valid but the implementation cannot perform the lookup at runtime, and silently dropping the request may safer than misreporting "No Such Interface".
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: xsk: tighten UMEM headroom validation to account for tailroom and mi...
In the Linux kernel, the following vulnerability has been resolved: xsk: tighten UMEM headroom validation to account for tailroom and min frame The current headroom validation in xdp_umem_reg() could leave us with insufficient space dedicated to even receive minimum-sized ethernet frame. Furthermore if multi-buffer would come to play then skb_shared_info stored at the end of XSK frame would be corrupted. HW typically works with 128-aligned sizes so let us provide this value as bare minimum. Multi-buffer setting is known later in the configuration process so besides accounting for 128 bytes, let us also take care of tailroom space upfront.
linuxIn the Linux kernel, the following vulnerability has been resolved: xfrm: Wait for RCU readers during policy netns exit xfrm_policy_fin...
In the Linux kernel, the following vulnerability has been resolved: xfrm: Wait for RCU readers during policy netns exit xfrm_policy_fini() frees the policy_bydst hash tables after flushing the policy work items and deleting all policies, but it does not wait for concurrent RCU readers to leave their read-side critical sections first. The policy_bydst tables are published via rcu_assign_pointer() and are looked up through rcu_dereference_check(), so netns teardown must also wait for an RCU grace period before freeing the table memory. Fix this by adding synchronize_rcu() before freeing the policy hash tables.
linuxIn the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: make hash table per queue Sharing a glo...
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: make hash table per queue Sharing a global hash table among all queues is tempting, but it can cause crash: BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue] [..] nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue] nfnetlink_rcv_msg+0x46a/0x930 kmem_cache_alloc_node_noprof+0x11e/0x450 struct nf_queue_entry is freed via kfree, but parallel cpu can still encounter such an nf_queue_entry when walking the list. Alternative fix is to free the nf_queue_entry via kfree_rcu() instead, but as we have to alloc/free for each skb this will cause more mem pressure.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: net: ioam6: fix OOB and missing lock When trace->type.bit6 is set: ...
In the Linux kernel, the following vulnerability has been resolved: net: ioam6: fix OOB and missing lock When trace->type.bit6 is set: if (trace->type.bit6) { ... queue = skb_get_tx_queue(dev, skb); qdisc = rcu_dereference(queue->qdisc); This code can lead to an out-of-bounds access of the dev->_tx[] array when is_input is true. In such a case, the packet is on the RX path and skb->queue_mapping contains the RX queue index of the ingress device. If the ingress device has more RX queues than the egress device (dev) has TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues. Add a check to avoid this situation since skb_get_tx_queue() does not clamp the index. This issue has also revealed that per queue visibility cannot be accurate and will be replaced later as a new feature. While at it, add missing lock around qdisc_qstats_qlen_backlog(). The function __ioam6_fill_trace_data() is called from both softirq and process contexts, hence the use of spin_lock_bh() here.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl ...
In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument.
linuxCWE-787In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading a...
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typically <256 bytes - A garbage rec_len (54648) caused ctx->pos to jump out of bounds - This triggered a UAF in ocfs2_check_dir_entry() Fix by adding a validation check in ocfs2_validate_inode_block() to ensure inodes with inline data have i_size <= id_count. This catches the corruption early during inode read and prevents all downstream code from operating on invalid data.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN repo...
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline data. On a corrupted filesystem, id_count can exceed the physical maximum inline data capacity, causing writes to overflow the inode block buffer. Call trace (crash path): vfs_copy_file_range (fs/read_write.c:1634) do_splice_direct splice_direct_to_actor iter_file_splice_write ocfs2_file_write_iter generic_perform_write ocfs2_write_end ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949) ocfs2_write_end_inline (fs/ocfs2/aops.c:1915) memcpy_from_folio <-- KASAN: write OOB So add id_count upper bound check in ocfs2_validate_inode_block() to alongside the existing i_size check to fix it.
linuxCWE-787In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certa...
In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certain situations, ep_free() in eventpoll.c will kfree the epi->ep eventpoll struct while it still being used by another concurrent thread. Defer the kfree() to an RCU callback to prevent UAF.
linuxCWE-401A remote code execution vulnerability exists in Notification Settings on GeoVision GV-ASWeb 6.2.0
A remote code execution vulnerability exists in Notification Settings on GeoVision GV-ASWeb 6.2.0. An authenticated user with System Setting permissions can execute arbitrary commands on the server by sending a crafted HTTP POST request to the ASWebCommon.srf backend endpoint to bypass the frontend restrictions.
CWE-94
8.8 HIGH
9.1 CRITICALWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.