CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set...
In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
linuxCWE-369In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is di...
In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT Hardware name: SoCFPGA Stratix 10 SoCDK (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : svc_normal_to_secure_thread+0x38c/0x990 lr : svc_normal_to_secure_thread+0x144/0x990 ... Call trace: svc_normal_to_secure_thread+0x38c/0x990 (P) kthread+0x150/0x210 ret_from_fork+0x10/0x20 Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402) ---[ end trace 0000000000000000 ]--- The issue occurs because rsu_send_async_msg() fails when RSU is not enabled in firmware, causing the channel to be freed via stratix10_svc_free_channel(). However, the probe function continues execution and registers svc_normal_to_secure_thread(), which subsequently attempts to access the already-freed channel, triggering the NULL pointer dereference. Fix this by properly cleaning up the async client and returning early on failure, preventing the thread from being used with an invalid channel.
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we...
In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we hit ftrace is killed by some errors, the kernel crash if we remove modules in which kprobe probes. BUG: unable to handle page fault for address: fffffbfff805000d PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:kprobes_module_callback+0x89/0x790 RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02 RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX: ffffffff86a8de90 RDX: ffffed1025c2af9b RSI: 0000000000000008 RDI: ffffffffc0280068 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed1025c2af9a R10: ffff88812e157cd7 R11: 205d323130325420 R12: 0000000000000002 R13: ffffffffc0290488 R14: 0000000000000002 R15: ffffffffc0280040 FS: 00007fbc450dd740(0000) GS:ffff888420331000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff805000d CR3: 000000010f624000 CR4: 00000000000006f0 Call Trace: <TASK> notifier_call_chain+0xc6/0x280 blocking_notifier_call_chain+0x60/0x90 __do_sys_delete_module.constprop.0+0x32a/0x4e0 do_syscall_64+0x5d/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because the kprobe on ftrace does not correctly handles the kprobe_ftrace_disabled flag set by ftrace_kill(). To prevent this error, check kprobe_ftrace_disabled in __disarm_kprobe_ftrace() and skip all ftrace related operations.
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_repl...
In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ]
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_he...
In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_ra...
In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)
linuxCWE-667In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free G...
In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qo...
In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() The update_cpu_qos_request() function attempts to initialize the 'freq' variable by dereferencing 'cpudata' before verifying if the 'policy' is valid. This issue occurs on systems booted with the "nosmt" parameter, where all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result, any call to update_qos_requests() will result in a NULL pointer dereference as the code will attempt to access pstate.turbo_freq using the NULL cpudata pointer. Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap() after initializing the 'freq' variable, so it is better to defer the 'freq' until intel_pstate_get_hwp_cap() has been called. Fix this by deferring the 'freq' assignment until after the policy and driver_data have been validated. [ rjw: Added one paragraph to the changelog ]
linuxCWE-476In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Hu...
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. (cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5)
linuxIn the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Dro...
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Drop reference to syncobj and timeline fence when aborting the ioctl due output array being too small. (cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27)
linuxIn the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge...
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476)
linuxIn the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: Fix memory leak in error path In samsung_...
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: Fix memory leak in error path In samsung_dsim_host_attach(), drm_bridge_add() is called to add the bridge. However, if samsung_dsim_register_te_irq() or pdata->host_ops->attach() fails afterwards, the function returns without removing the bridge, causing a memory leak. Fix this by adding proper error handling with goto labels to ensure drm_bridge_remove() is called in all error paths. Also ensure that samsung_dsim_unregister_te_irq() is called if the attach operation fails after the TE IRQ has been registered. samsung_dsim_unregister_te_irq() function is moved without changes to be before samsung_dsim_host_attach() to avoid forward declaration.
linuxCWE-401In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Fix user fence leak on alloc failure When dma_fence_ch...
In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Fix user fence leak on alloc failure When dma_fence_chain_alloc() fails, properly release the user fence reference to prevent a memory leak. (cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0)
linuxCWE-401In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Cleanup partially initialized sync on parse failure xe...
In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Cleanup partially initialized sync on parse failure xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence, or user fence) before hitting a later failure path. Several of those paths returned directly, leaving partially initialized state and leaking refs. Route these error paths through a common free_sync label and call xe_sync_entry_cleanup(sync) before returning the error. (cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22)
linuxCWE-459In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit()
In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit(). nfsd_nl_listener_set_doit() uses get_current_cred() without put_cred(). As we can see from other callers, svc_xprt_create_from_sa() does not require the extra refcount. nfsd_nl_listener_set_doit() is always in the process context, sendmsg(), and current->cred does not go away. Let's use current_cred() in nfsd_nl_listener_set_doit().
linuxCWE-401In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map...
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up.
linuxCWE-401In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix starvation of scx_enable() under fair-class saturatio...
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix starvation of scx_enable() under fair-class saturation During scx_enable(), the READY -> ENABLED task switching loop changes the calling thread's sched_class from fair to ext. Since fair has higher priority than ext, saturating fair-class workloads can indefinitely starve the enable thread, hanging the system. This was introduced when the enable path switched from preempt_disable() to scx_bypass() which doesn't protect against fair-class starvation. Note that the original preempt_disable() protection wasn't complete either - in partial switch modes, the calling thread could still be starved after preempt_enable() as it may have been switched to ext class. Fix it by offloading the enable body to a dedicated system-wide RT (SCHED_FIFO) kthread which cannot be starved by either fair or ext class tasks. scx_enable() lazily creates the kthread on first use and passes the ops pointer through a struct scx_enable_cmd containing the kthread_work, then synchronously waits for completion. The workfn runs on a different kthread from sch->helper (which runs disable_work), so it can safely flush disable_work on the error path without deadlock.
linuxIn the Linux kernel, the following vulnerability has been resolved: nstree: tighten permission checks for listing Even privileged servi...
In the Linux kernel, the following vulnerability has been resolved: nstree: tighten permission checks for listing Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts.
linuxIn the Linux kernel, the following vulnerability has been resolved: mm: memfd_luo: always dirty all folios A dirty folio is one which h...
In the Linux kernel, the following vulnerability has been resolved: mm: memfd_luo: always dirty all folios A dirty folio is one which has been written to. A clean folio is its opposite. Since a clean folio has no user data, it can be freed under memory pressure. memfd preservation with LUO saves the flag at preserve(). This is problematic. The folio might get dirtied later. Saving it at freeze() also doesn't work, since the dirty bit from PTE is normally synced at unmap and there might still be mappings of the file at freeze(). To see why this is a problem, say a folio is clean at preserve, but gets dirtied later. The serialized state of the folio will mark it as clean. After retrieve, the next kernel will see the folio as clean and might try to reclaim it under memory pressure. This will result in losing user data. Mark all folios of the file as dirty, and always set the MEMFD_LUO_FOLIO_DIRTY flag. This comes with the side effect of making all clean folios un-reclaimable. This is a cost that has to be paid for participants of live update. It is not expected to be a common use case to preserve a lot of clean folios anyway. Since the value of pfolio->flags is a constant now, drop the flags variable and set it directly.
linuxIn the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() J...
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it
linux
5.5 MEDIUM
9.1 CRITICALWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.