CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: Fix MAC comparison to be constant-time To prevent timin...
In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.
linuxIn the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timi...
In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.
linuxIn the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_g...
In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.
linuxCWE-667In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If ...
In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening.
linuxIn the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() op...
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free.
linuxCWE-416In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer o...
In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.
linuxCWE-416Password Pusher is an open source application to communicate sensitive information over the web
Password Pusher is an open source application to communicate sensitive information over the web. Prior to versions 1.69.3 and 2.4.2, a security issue in OSS PasswordPusher allowed unauthenticated creation of file-type pushes through a generic JSON API create path under certain configurations. This could bypass the intended authentication boundary for file push creation. This issue has been patched in versions 1.69.3 and 2.4.2.
apnoticCWE-288In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pc...
In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled.
linuxCWE-617In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_allo...
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.
linuxIn the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/su...
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.
linuxCWE-362In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The l...
In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functions would be too fragile, so disable KCOV instrumentation for the entire machine_kexec_64.c and physaddr.c. If coverage-guided fuzzing ever needs these components in the future, other approaches should be considered. The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported there. [ bp: Space out comment for better readability. ]
linuxIn the Linux kernel, the following vulnerability has been resolved: spi: spidev: fix lock inversion between spi_lock and buf_lock The s...
In the Linux kernel, the following vulnerability has been resolved: spi: spidev: fix lock inversion between spi_lock and buf_lock The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour.
linuxCWE-667In OpenStack Ironic before 35.0.2 (in a certain non-default configuration), instance_info['ks_template'] is rendered without sandboxing
In OpenStack Ironic before 35.0.2 (in a certain non-default configuration), instance_info['ks_template'] is rendered without sandboxing.
CWE-1336A vulnerability was found in 8421bit MiniClaw up to 223c16a1088e138838dcbd18cd65a37c35ac5a84
A vulnerability was found in 8421bit MiniClaw up to 223c16a1088e138838dcbd18cd65a37c35ac5a84. Affected is the function executeCognitivePulse of the file src/kernel.ts. Performing a manipulation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The patch is named 028f62216dee9f64833d0f1cfda7c217067ceba8. To fix this issue, it is recommended to deploy a patch.
8421bitCWE-77CWE-78Improper access control in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network
Improper access control in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network.
microsoftCWE-20i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes
i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes. Versions prior to 4.0.8 substitute {{key}} interpolation tokens inside src and href attribute values with the raw string returned by i18next.t(). The substitution logic in src/localize.js (the replaceInside handler) only guards against a duplicated http:// origin prefix — it does not validate the URL scheme of the substituted value. A translated value such as javascript:alert(1) or data:text/html,<script>...</script> is applied unchanged to the live DOM attribute when an attacker can influence the content of a translation file or the translation-backend response — for example, via a compromised translation CDN, user-contributed locales, a MITM on a plain-HTTP backend, or write access to the translation JSON. This issue was patched in version 4.0.8.
i18nextCWE-79CWE-94Copilot said: i18nextify is a JavaScript library that adds i18nextify is a JavaScript library that adds website internationalization via ...
Copilot said: i18nextify is a JavaScript library that adds i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes. Versions prior to 3.0.5 interpolate the lng and ns values directly into the configured loadPath / addPath URL template without any encoding, validation, or path sanitisation. When an application exposes the language-code selection to user-controlled input (the default — i18next-browser-languagedetector reads ?lng= query params, cookies, localStorage, and request headers), an attacker can inject characters that change the structure of the outgoing request URL. This is a single URL-injection vulnerability. The attacker-controlled value is neutralised before it is used as part of an output URL string; the attack shape covers both path traversal and broader URL-structure injection — both are closed by the one interpolateUrl sanitisation fix. This issue has been fixed in version 3.0.5. If users cannot upgrade immediately, they can work around the issue by sanitising lng / ns before they reach i18next (strip .., /, \, ?, #, %, whitespace, and control characters; cap the length).
i18nextCWE-22CWE-74Wish is an SSH server with defaults and a collection of middlewares
Wish is an SSH server with defaults and a collection of middlewares. From version 2.0.0 to before version 2.0.1, the SCP middleware in charm.land/wish/v2 is vulnerable to path traversal attacks. A malicious SCP client can read arbitrary files from the server, write arbitrary files to the server, and create directories outside the configured root directory by sending crafted filenames containing ../ sequences over the SCP protocol. This issue has been patched in version 2.0.1.
charmCWE-22Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure
Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure. Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation. The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header). The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes.
chornyCWE-340In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been ...
In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly.
linux
9.8 CRITICAL
5.5 MEDIUM
3.0 LOWWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.