CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication du...
TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization. D100C is the chime delivered with your Tapo camera, and it is delivered with the following Tapo products: D130, D210, D235, D225, TD21, TDB21 and TD25
tp-linkCWE-319In Casdoor versions 2.362.0 and earlier, the SAML callback handler in controllers/auth.go accepts any well-formed SAMLResponse sent to /a...
In Casdoor versions 2.362.0 and earlier, the SAML callback handler in controllers/auth.go accepts any well-formed SAMLResponse sent to /api/acs without verifying that it corresponds to an AuthnRequest previously issued by Casdoor. Additionally, if an administrator disables or deletes an IdP (Identity Provider) after a SAML flow has started, the handler still processes the response using the provider snapshot loaded at the start of the request. As a result, an attacker controlling a registered upstream IdP can send unsolicited SAML responses, or replay a legitimately captured response in a different session or after the original flow has ended. In both cases, Casdoor accepts the response and issues a session, enabling persistent unauthorized access.
Casdoor versions 2.362.0 and earlier do not verify that a JWT used for token exchange is still active
Casdoor versions 2.362.0 and earlier do not verify that a JWT used for token exchange is still active. The GetTokenExchangeToken() function in object/token_oauth.go validates the JWT signature and parses its claims, but never queries the Token table to verify whether the subject token has been revoked or invalidated. Because the revocation check is entirely absent, administrators are unable to terminate active sessions or revoke compromised tokens.
Casdoor versions 2.362.0 and earlier do not enforce SAML assertion time bounds
Casdoor versions 2.362.0 and earlier do not enforce SAML assertion time bounds. The gosaml2 library reports all time-validation results, including NotOnOrAfter and NotBefore, in the assertionInfo.WarningInfo field. However, ParseSamlResponse() never reads this field, meaning that time bounds are computed by the library but silently discarded before the user session is issued.
Casdoor versions 2.362.0 and earlier map SAML assertions to user sessions without replay protection
Casdoor versions 2.362.0 and earlier map SAML assertions to user sessions without replay protection. The ParseSamlResponse() function in object/saml_sp.go calls sp.RetrieveAssertionInfo() and immediately maps the result to a user session. There is no assertion ID cache, OneTimeUse condition enforcement, or replay detection anywhere in the SAML SP code path. As a result, an attacker can replay a previously captured SAML assertion to obtain an authenticated session for the assertion’s subject, including administrator accounts, without needing the user’s password or MFA credentials.
CWE-294Casdoor versions 2.362.0 and earlier contain a vulnerability enabling cross-organization token exchange
Casdoor versions 2.362.0 and earlier contain a vulnerability enabling cross-organization token exchange. The GetTokenExchangeToken function in object/token_oauth.go validates JWT signatures but does not verify that the token's user belongs to the same organization as the target application. This can result in privilege escalation across organizational boundaries.
In Casdoor versions 2.362.0 and earlier, the SAML service provider implementation does not validate the AudienceRestriction element in SA...
In Casdoor versions 2.362.0 and earlier, the SAML service provider implementation does not validate the AudienceRestriction element in SAML assertions. The buildSp function in object/saml_sp.go never sets AudienceURI on the gosaml2 SAMLServiceProvider struct and never inspects WarningInfo.NotInAudience. This allows assertions issued for other service providers to be accepted by Casdoor.
Casdoor versions 2.362.0 and earlier contain a vulnerability involving unverified email binding that may enable account takeover
Casdoor versions 2.362.0 and earlier contain a vulnerability involving unverified email binding that may enable account takeover. The getExistUserByBindingRule function matches users by email without checking the email_verified claim from upstream providers; the idp.UserInfo struct does not even include a EmailVerified field. An attacker can supply an unverified email claim from an upstream provider to take over accounts that use the same email address.
Casdoor versions 2.362.0 and earlier contain a logic flaw in the social‑login binding flow that allows users to bypass configured MFA req...
Casdoor versions 2.362.0 and earlier contain a logic flaw in the social‑login binding flow that allows users to bypass configured MFA requirements. The binding‑rule code path in controllers/auth.go calls HandleLoggedIn directly without invoking checkMfaEnable. Any user authenticating via this path is logged in without MFA enforcement.
Casdoor versions 2.362.0 and earlier contain a vulnerability that allows an attacker to bypass authentication by supplying an arbitrary s...
Casdoor versions 2.362.0 and earlier contain a vulnerability that allows an attacker to bypass authentication by supplying an arbitrary signing certificate. The buildSpCertificateStore function extracts the X.509 certificate directly from the incoming SAMLResponse instead of using the trusted pre-configured Identity Provider certificate, allowing an attacker to forge assertions signed with an attacker-controlled key.
Due to improper enforcement of authentication rate-limiting on a debug SSH service in Archer C64 v1, the SSH service allows unlimited aut...
Due to improper enforcement of authentication rate-limiting on a debug SSH service in Archer C64 v1, the SSH service allows unlimited authentication attempts and uses the same credentials as the web interface. This enables an attacker to brute-force valid credentials via SSH. Successful exploitation could allow an attacker with adjacent network access to obtain administrative credentials through unrestricted authentication attempts and subsequently gain full administrative access to the device, impacting system confidentiality, integrity, and availability.
tp-linkCWE-288CWE-306Hono is a Web application framework that provides support for any JavaScript runtime
Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, app.mount() strips the mount prefix from the incoming request path using the raw URL pathname, while route matching is performed against the percent-decoded path. This inconsistency causes the prefix to be stripped at the wrong position when the path contains percent-encoded multi-byte characters, resulting in the mounted sub-application receiving an incorrect path. This vulnerability is fixed in 4.12.21.
honoCWE-444CWE-693Hono is a Web application framework that provides support for any JavaScript runtime
Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, the serialize() function in hono/cookie validates domain and path options against characters that corrupt Set-Cookie header syntax (;, \r, \n), but does not apply the same validation to sameSite and priority. An application that passes user-controlled input into either option may produce a Set-Cookie response header containing attacker-chosen additional attributes. This vulnerability is fixed in 4.12.21.
honoCWE-113CWE-1287Hono is a Web application framework that provides support for any JavaScript runtime
Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, the ip-restriction middleware (hono/ip-restriction) compares incoming IP addresses against configured deny and allow rules using string equality after partial normalization. Non-canonical IPv6 representations of an address already listed in a static rule — such as compressed forms, explicit-zero forms, or hex-notation IPv4-mapped addresses — do not match the normalized rule entry, causing the rule to be silently skipped. This vulnerability is fixed in 4.12.21.
honoCWE-1289CWE-185Hono is a Web application framework that provides support for any JavaScript runtime
Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, the jwt and jwk middlewares do not verify that the Authorization header value uses theBearer scheme. Any two-part header value — regardless of the scheme name in the first position — proceeds to JWT verification. A request presenting a valid JWT under a non-Bearer scheme identifier (such as Basic or Token) is authenticated identically to a correctly formed Bearer request. This vulnerability is fixed in 4.12.21.
honoCWE-285opentelemetry-java is the Java implementation of the OpenTelemetry API for recording telemetry, and SDK for managing telemetry recorded b...
opentelemetry-java is the Java implementation of the OpenTelemetry API for recording telemetry, and SDK for managing telemetry recorded by the API. Prior to 1.62.0, a vulnerability affects the baggage propagation implementation in opentelemetry-api and opentelemetry-extension-trace-propagators. Parsing oversized baggage causes unbounded memory allocation and CPU consumption. Because baggage is automatically re-injected into every outgoing request, the effect can fan out to downstream services that never received the original malicious request. This vulnerability is fixed in 1.62.0.
CWE-770Synapse is an open source Matrix homeserver implementation
Synapse is an open source Matrix homeserver implementation. Prior to 1.152.1, local authenticated users can cause Synapse to starve other requests of CPU and lead to other requests failing, causing other users to be denied service. This vulnerability is fixed in 1.152.1.
elementCWE-770Local Path Provisioner provides a way for the Kubernetes users to utilize the local storage in each node
Local Path Provisioner provides a way for the Kubernetes users to utilize the local storage in each node. Prior to 0.0.36, a malicious user with permission to edit the local-path-config ConfigMap in the local-path-storage namespace can manipulate the helperPod.yaml template used by rancher/local-path-provisioner. The helperPod.yaml template is loaded by the provisioner and used to create HelperPods during PVC provisioning and cleanup operations. However, the template is not sufficiently validated before use. Security-sensitive fields such as securityContext.privileged, hostPath volumes, and Linux capabilities can be injected into the template. When a PVC operation triggers HelperPod creation, the provisioner creates the HelperPod using the attacker-controlled template. This can result in a privileged pod running on the target node with the host root filesystem mounted. This may allow the attacker to access sensitive host files, read ServiceAccount tokens from other pods on the same node, access other tenants' local-path volume data, or modify files on the host node. This vulnerability is fixed in 0.0.36.
suseCWE-269CloudNativePG is a platform designed to manage PostgreSQL databases within Kubernetes environments
CloudNativePG is a platform designed to manage PostgreSQL databases within Kubernetes environments. Prior to 1.29.1 and 1.28.3, the CloudNativePG metrics exporter opens its PostgreSQL connection as the postgres superuser via the pod-local Unix socket, then demotes the session with SET ROLE pg_monitor. SET ROLE changes only current_user; session_user remains postgres. Any SQL expression evaluated inside the scrape session can invoke RESET ROLE to recover real superuser privileges, then use COPY ... TO PROGRAM to spawn an OS-level subprocess as the postgres user inside the primary pod. The READ ONLY transaction flag does not block this; it gates writes to database state, not external processes. This vulnerability is fixed in 1.29.1 and 1.28.3.
linuxfoundationCWE-250CWE-271Zed is a code editor
Zed is a code editor. Prior to 0.229.0, Zed's terminal tool permission system can be bypassed via bash arithmetic expansion $((...)), allowing execution of arbitrary commands nested inside an allowlisted command like echo. This vulnerability is fixed in 0.229.0.
zedCWE-78
7.5 HIGH
9.1 CRITICAL
5.3 MEDIUMWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.