CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
A broken access control may allow an authenticated user to perform a horizontal privilege escalation
A broken access control may allow an authenticated user to perform a horizontal privilege escalation. The vulnerability only impacts specific configurations.
pointsharpCWE-639Use of Hard-coded Credentials vulnerability in Avantra allows Accessing Functionality Not Properly Constrained by ACLs
Use of Hard-coded Credentials vulnerability in Avantra allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Avantra: before 25.3.0.
CWE-798Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected preferred key exchange group when its key exchange group conf...
Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected preferred key exchange group when its key exchange group configuration includes the default by using the 'DEFAULT' keyword. Impact summary: A less preferred key exchange may be used even when a more preferred group is supported by both client and server, if the group was not included among the client's initial predicated keyshares. This will sometimes be the case with the new hybrid post-quantum groups, if the client chooses to defer their use until specifically requested by the server. If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to interpolate the built-in default group list into its own configuration, perhaps adding or removing specific elements, then an implementation defect causes the 'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups were treated as a single sufficiently secure 'tuple', with the server not sending a Hello Retry Request (HRR) even when a group in a more preferred tuple was mutually supported. As a result, the client and server might fail to negotiate a mutually supported post-quantum key agreement group, such as 'X25519MLKEM768', if the client's configuration results in only 'classical' groups (such as 'X25519' being the only ones in the client's initial keyshare prediction). OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS 1.3 key agreement group on TLS servers. The old syntax had a single 'flat' list of groups, and treated all the supported groups as sufficiently secure. If any of the keyshares predicted by the client were supported by the server the most preferred among these was selected, even if other groups supported by the client, but not included in the list of predicted keyshares would have been more preferred, if included. The new syntax partitions the groups into distinct 'tuples' of roughly equivalent security. Within each tuple the most preferred group included among the client's predicted keyshares is chosen, but if the client supports a group from a more preferred tuple, but did not predict any corresponding keyshares, the server will ask the client to retry the ClientHello (by issuing a Hello Retry Request or HRR) with the most preferred mutually supported group. The above works as expected when the server's configuration uses the built-in default group list, or explicitly defines its own list by directly defining the various desired groups and group 'tuples'. No OpenSSL FIPS modules are affected by this issue, the code in question lies outside the FIPS boundary. OpenSSL 3.6 and 3.5 are vulnerable to this issue. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released. OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue.
opensslsiemensCWE-757Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of S...
Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion. The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS. Two compression algorithms are affected: * zlib: Activates immediately after key exchange, enabling unauthenticated attacks * zlib@openssh.com: Activates post-authentication, enabling authenticated attacks Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments. This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4. This issue affects OTP from OTP 17.0 until OTP 28.4.1, 27.3.4.9 and 26.2.5.18 corresponding to ssh from 3.0.1 until 5.5.1, 5.2.11.6 and 5.1.4.14.
erlangCWE-409Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP (ssh_sftpd module) allows Path...
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP (ssh_sftpd module) allows Path Traversal. This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:is_within_root/2. The SFTP server uses string prefix matching via lists:prefix/2 rather than proper path component validation when checking if a path is within the configured root directory. This allows authenticated users to access sibling directories that share a common name prefix with the configured root directory. For example, if root is set to /home/user1, paths like /home/user10 or /home/user1_backup would incorrectly be considered within the root. This issue affects OTP from OTP 17.0 until OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 until 5.5.1, 5.2.11.6 and 5.1.4.14.
erlangCWE-22A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images
A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container
redhatCWE-276In UNIX Fourth Research Edition (v4), the su command is vulnerable to a buffer overflow due to the 'password' variable having a fixed siz...
In UNIX Fourth Research Edition (v4), the su command is vulnerable to a buffer overflow due to the 'password' variable having a fixed size of 100 bytes. A local user can exploit this to gain root privileges. It is unlikely that UNIX v4 is running anywhere outside of a very small number of lab environments. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
opengroupCWE-120A container privilege escalation flaw was found in certain Fuse images
A container privilege escalation flaw was found in certain Fuse images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
redhatCWE-276The authentication mechanism for a specific feature in the EasyShare module contains a vulnerability
The authentication mechanism for a specific feature in the EasyShare module contains a vulnerability. If specific conditions are met on a local network, it can cause data leakage
vivoCWE-306Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2...
Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.
CWE-306Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2...
Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.
CWE-306Authentication bypass by capture-replay vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0,...
Authentication bypass by capture-replay vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.
CWE-294Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions
Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions. This vulnerability affects the GSSAPI patches added by various Linux distributions and does not affect the OpenSSH upstream project itself. The usage of sshpkt_disconnect() on an error, which does not terminate the process, allows an attacker to send an unexpected GSSAPI message type during the GSSAPI key exchange to the server, which will call the underlying function and continue the execution of the program without setting the related connection variables. As the variables are not initialized to NULL the code later accesses those uninitialized variables, accessing random memory, which could lead to undefined behavior. The recommended workaround is to use ssh_packet_disconnect() instead, which does terminate the process. The impact of the vulnerability depends heavily on the compiler flag hardening configuration.
canonicaldebianopenbsdCWE-908A flaw was found in mirror-registry where an authenticated user can trick the system into accessing unintended internal or restricted sys...
A flaw was found in mirror-registry where an authenticated user can trick the system into accessing unintended internal or restricted systems by providing malicious web addresses. When the application processes these addresses, it automatically follows redirects without verifying the final destination, allowing attackers to route requests to systems they should not have access to.
redhatCWE-601Local File Inclusion in Contact Plan, E-Mail, SMS and Fax components in Asseco SEE Live 2.0 allows remote authenticated users to access f...
Local File Inclusion in Contact Plan, E-Mail, SMS and Fax components in Asseco SEE Live 2.0 allows remote authenticated users to access files on the host via "path" parameter in the downloadAttachment and downloadAttachmentFromPath API calls.
assecoCWE-552Heap buffer overflow vulnerability in LibreDWG versions v0.13.3.7571 up to v0.13.3.7835 allows a crafted DWG file to cause a Denial of Se...
Heap buffer overflow vulnerability in LibreDWG versions v0.13.3.7571 up to v0.13.3.7835 allows a crafted DWG file to cause a Denial of Service (DoS) via the function decompress_R2004_section at decode.c.
gnuCWE-122A privileged Ignition user, intentionally or otherwise, imports an external file with a specially crafted payload, which executes embedde...
A privileged Ignition user, intentionally or otherwise, imports an external file with a specially crafted payload, which executes embedded malicious code.
inductiveautomationCWE-502The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member suc...
The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member such as GNUTYPE_LONGNAME or GNUTYPE_LONGLINK. This could result in a crafted tar archive being misinterpreted by the tarfile module compared to other implementations.
pythonCWE-20CWE-434OpenClaw versions 2026.2.21-2 up to, but not including, 2026.2.22, and @openclaw/voice-call versions 2026.2.21 up to, but not including, ...
OpenClaw versions 2026.2.21-2 up to, but not including, 2026.2.22, and @openclaw/voice-call versions 2026.2.21 up to, but not including, 2026.2.22 accept media-stream WebSocket upgrades before stream validation, allowing unauthenticated clients to establish connections. Remote attackers can hold idle pre-authenticated sockets open to consume connection resources and degrade service availability for legitimate streams.
openclawCWE-770curl would wrongly reuse an existing HTTP proxy connection doing CONNECT to a server, even if the new request uses different credentials ...
curl would wrongly reuse an existing HTTP proxy connection doing CONNECT to a server, even if the new request uses different credentials for the HTTP proxy. The proper behavior is to create or use a separate connection.
haxxCWE-305
8.8 HIGH
6.5 MEDIUM
3.3 LOWWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.