CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrf...
In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.
linuxIn the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on e...
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map.
linuxIn the Linux kernel, the following vulnerability has been resolved: net: ioam6: fix OOB and missing lock When trace->type.bit6 is set: ...
In the Linux kernel, the following vulnerability has been resolved: net: ioam6: fix OOB and missing lock When trace->type.bit6 is set: if (trace->type.bit6) { ... queue = skb_get_tx_queue(dev, skb); qdisc = rcu_dereference(queue->qdisc); This code can lead to an out-of-bounds access of the dev->_tx[] array when is_input is true. In such a case, the packet is on the RX path and skb->queue_mapping contains the RX queue index of the ingress device. If the ingress device has more RX queues than the egress device (dev) has TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues. Add a check to avoid this situation since skb_get_tx_queue() does not clamp the index. This issue has also revealed that per queue visibility cannot be accurate and will be replaced later as a new feature. While at it, add missing lock around qdisc_qstats_qlen_backlog(). The function __ioam6_fill_trace_data() is called from both softirq and process contexts, hence the use of spin_lock_bh() here.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB r...
In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260 There will be only one bucket in dentry_hashtable when dhash_entries is set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then, following process will access more than one buckets(which memory region is not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB! Fix it by limiting the minimal number of dentry_hashtable bucket to two, so that 'd_hash_shift' won't exceeds the bit width of type u32.
linuxCWE-125In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mappe...
In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups().
linuxArelle before 2.39.10 contains an unauthenticated remote code execution vulnerability in the /rest/configure REST endpoint that accepts a...
Arelle before 2.39.10 contains an unauthenticated remote code execution vulnerability in the /rest/configure REST endpoint that accepts a plugins query parameter and forwards it to the plugin manager without authentication or authorization. Attackers can supply a URL to a malicious Python file through the plugins parameter, causing the Arelle webserver to download and execute the attacker-controlled code within the Arelle process with its privileges.
workivaCWE-306Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Tegsoft Management and Information ...
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Tegsoft Management and Information Services Trade Limited Company Online Support Application allows Reflected XSS. This issue affects Online Support Application: from V3 through 31122025.
CWE-79GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices
GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices. It is a native application accessed locally, but it is also possible to enable remote access via the "WebCam Server" feature. Once enabled, it is possible to access to the management and monitoring feature via a regular Web interface. This webersever is another native application, compiled without ASLR, which makes exploitation much easier and more likely. Most of the features require authentication before being reachable and leverage a standard login page to grant access. However the `gvapi` endpoint uses its own authentication mechanism via an `HTTP Authorization` header. It supports both `Basic` authentication and the `Digest` modes of authentication. #### Stack-overflow via unbound copy of base64 decoded string The `b64decoder` string is sized dynamically, but it is then copied to the `Buffer` stack variable one character at the time at [0], and there's no bound-check. As such, if the decoded string is bigger than 256 characters (the size of the `Buffer` variable) then a stack overflow occurs. Because the data can be fully controlled by an attacker and lack of ASLR, this vulnerability can easily be exploited to gain full code execution as SYSTEM on the machine running the service.
CWE-787Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005
Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_gvret.cpp, the length field in GVRET binary data is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted GVRET frames.
openvehiclesCWE-121AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-...
AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently.
linuxfoundationCWE-22CWE-367In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_g...
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers.
linuxCWE-787A flaw was found in gnutls
A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust.
gnuredhatCWE-179Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in TUBITAK BILGEM Software Technologies Rese...
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in TUBITAK BILGEM Software Technologies Research Institute Pardus Software Center allows Path Traversal. This issue affects Pardus Software Center: before 0.6.4.
CWE-22Ollama for Windows contains a Remote Code Execution vulnerability in its update mechanism due to improper handling of attacker‑controlled...
Ollama for Windows contains a Remote Code Execution vulnerability in its update mechanism due to improper handling of attacker‑controlled HTTP response headers. When downloading updates, the application constructs local file paths using values derived from HTTP headers without validation. These values are passed directly to filepath.Join, allowing path traversal sequences (../) to be resolved and enabling files to be written outside the intended update staging directory. An attacker who can influence update responses can exploit this flaw to write arbitrary executables to attacker‑chosen locations accessible to the current user, including the Windows Startup directory. This allows execution of arbitrary executables. Critically, when chained with CVE‑2026‑42248 (Missing Signature Verification for Updates), an attacker can deliver malicious payloads that are written to sensitive locations and executed automatically. Because Ollama for Windows performs silent automatic updates and executes staged binaries without user interaction, this results in automatic and persistent code execution without user awareness. Maintainers of this project were notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Versions from 0.12.10 to 0.17.5 were tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable.
ollamaCWE-22CWE-494Ollama for Windows does not perform integrity or authenticity verification of downloaded update executables
Ollama for Windows does not perform integrity or authenticity verification of downloaded update executables. Unlike other platforms, the Windows implementation of the update verification routine unconditionally returns success so no digital signature or trust validation is performed before staging or executing update payloads, enabling attacker‑supplied executables to be accepted and later executed by the application. Critically, Ollama for Windows performs silent automatic updates, so the malicious payload may be installed automatically without user awareness. Maintainers of this project were notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Versions from 0.12.10 to 0.17.5 were tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable.
ollamaCWE-494Insecure deserialization of untrusted input in StellarGroup HPX 1.11.0 under certain conditions may allow attackers to execute arbitrary ...
Insecure deserialization of untrusted input in StellarGroup HPX 1.11.0 under certain conditions may allow attackers to execute arbitrary code or other unspecified impacts.
stellar-groupCWE-502An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5
An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5. Listening to broadcast packets can lead to credentials leak. An attacker can listen to broadcast messages to trigger this vulnerability. When interacting with various Geovision devices on the network, the utility may send privileged commands; in order to do so, the username and password of the device need to be provided. In some instances the command is broadcasted over UDP and the username/password are encrypted using a cryptographic protocol that appears to be derivated from Blowfish. However the symmetric key used for the encryption is also included in the packet, and thus the security of the username/password only relies on the "obscurity" of the encryption scheme. An attacker on the same LAN can listen to the broadcast traffic once an admin user interacts with the device, and decrypt the credentials using their own implementation of the algorithm. With this password the attacker would have full control over the device configuration, allowing them to change its ip address or even reset it to factory default.
CWE-656In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `e...
In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`.
linuxVersions of the package simple-git before 3.36.0 are vulnerable to Remote Code Execution (RCE) due to an incomplete fix for [CVE-2022-259...
Versions of the package simple-git before 3.36.0 are vulnerable to Remote Code Execution (RCE) due to an incomplete fix for [CVE-2022-25912](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-3112221) that blocks the -c option but not the equivalent --config form. If untrusted input can reach the options argument passed to simple-git, an attacker may still achieve remote code execution by enabling protocol.ext.allow=always and using an ext:: clone source.
simple-git_projectCWE-94In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_ad...
In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_add_claim() can replace claim->backbone_gw and drop the old gateway's last reference while readers still follow the pointer. The netlink claim dump path dereferences claim->backbone_gw->orig and takes claim->backbone_gw->crc_lock without pinning the underlying backbone gateway. batadv_bla_check_claim() still has the same naked pointer access pattern. Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate on a stable gateway reference until the read-side work is complete. This keeps the dump and claim-check paths aligned with the lifetime rules introduced for the other BLA claim readers.
linuxCWE-476
9.1 CRITICAL
3.7 LOWWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.