CVE Watch
Every published CVE, mapped to engagement reality.
Crawled from cve.org every day. Each entry annotated with the QSearch coverage signal — how many of our agents, skills, and playbooks address the technique. Subscribe via RSS for SIEM pipe, or get the weekly digest by email.
A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 5.0.0...
A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox 4.2 all versions, FortiSandbox Cloud 5.0.4 through 5.0.5, FortiSandbox PaaS 5.0.4 through 5.0.5 may allow an unauthenticated attacker to execute unauthorized commands via specifically crafted HTTP requests
fortinetCWE-78Waves Central for macOS versions 13.0.9 through 16.5.5 contain a local privilege escalation vulnerability in the privileged helper service
Waves Central for macOS versions 13.0.9 through 16.5.5 contain a local privilege escalation vulnerability in the privileged helper service. The helper validates connecting XPC clients using the client process identifier (PID) to verify code-signing identity. Because process identifiers can be reused, a local attacker can exploit a race condition between the time a connection request is made and the time the helper performs validation, causing the helper to trust an attacker-controlled process. This allows the attacker to invoke privileged operations, resulting in arbitrary code execution as root. The issue is fixed in version 16.6.2.
CWE-367Waves Central for macOS versions 13.0.9 through 16.5.5 contain a local privilege escalation vulnerability
Waves Central for macOS versions 13.0.9 through 16.5.5 contain a local privilege escalation vulnerability. A trusted XPC client component included with the product is signed with hardened runtime entitlements that permit dynamic library injection. A local attacker can set the DYLD_INSERT_LIBRARIES environment variable to inject an attacker-controlled dynamic library into the trusted client process at launch. The injected code runs within the signed process and can connect to the product's privileged helper service to invoke privileged operations, resulting in arbitrary code execution as root. The issue is fixed in version 16.6.2.
CWE-426An OS command injection vulnerability in Ivanti EPMM before 12.9.0.1, 12.8.0.3 and 12.7.0.2 versions allows a remote authenticated attack...
An OS command injection vulnerability in Ivanti EPMM before 12.9.0.1, 12.8.0.3 and 12.7.0.2 versions allows a remote authenticated attacker to execute arbitrary commands as root
CWE-78An Authentication Bypass vulnerability (CWE-288) in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauth...
An Authentication Bypass vulnerability (CWE-288) in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated attacker to create arbitrary administrative accounts and obtain full administrative access
CWE-288An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated u...
An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated user to achieve root-level remote code execution
ivantiCWE-78An Internal Asset Exposed to Unsafe Debug Access Level or State vulnerability [CWE-1244] vulnerability in Fortinet FortiOS 7.6.0 through ...
An Internal Asset Exposed to Unsafe Debug Access Level or State vulnerability [CWE-1244] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.2, FortiOS 7.4.0 through 7.4.7, FortiOS 7.2.0 through 7.2.10, FortiOS 7.0.0 through 7.0.16, FortiOS 6.4 all versions, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4.0 through 7.4.10, FortiProxy 7.2.0 through 7.2.14, FortiProxy 7.0 all versions may allow an authenticated admin to execute lua scripts via crafted CLI commands.
fortinetCWE-1244- CVE-2026-92792026-06-09
Logseq exposes an IPC handler that allows the renderer process to execute shell commands
Logseq exposes an IPC handler that allows the renderer process to execute shell commands. While an allowlist restricts the command name (e.g. `git`, `pandoc`, `grep`), the argument string is concatenated with the command and passed to `child_process.spawn` with the `shell: true` option, allowing shell metacharacters in the arguments to bypass the allowlist. An attacker with JavaScript execution in the renderer (e.g. via XSS or a malicious plugin) can execute arbitrary shell commands with the privileges of the Logseq process, leading to remote code execution on the host. While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch.
CWE-78 Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Netcad Software Inc
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Netcad Software Inc. E-İmar allows SQL Injection. This issue affects E-İmar: from 2.10.1.0 before 3.0.2.
CWE-89In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: fix off by one bugs Change these comparison...
In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: fix off by one bugs Change these comparisons from > vs >= to avoid accessing one element beyond the end of the arrays. While at it, use ARRAY_SIZE instead of the _MAX enum values. [fix cosmetic issues]
In the Linux kernel, the following vulnerability has been resolved: 9p: fix access mode flags being ORed instead of replaced Since comm...
In the Linux kernel, the following vulnerability has been resolved: 9p: fix access mode flags being ORed instead of replaced Since commit 1f3e4142c0eb ("9p: convert to the new mount API"), v9fs_apply_options() applies parsed mount flags with |= onto flags already set by v9fs_session_init(). For 9P2000.L, session_init sets V9FS_ACCESS_CLIENT as the default, so when the user mounts with "access=user", both bits end up set. Access mode checks compare against exact values, so having both bits set matches neither mode. This causes v9fs_fid_lookup() to fall through to the default switch case, using INVALID_UID (nobody/65534) instead of current_fsuid() for all fid lookups. Root is then unable to chown or perform other privileged operations. Fix by clearing the access mask before applying the user's choice.
- CVE-2026-529052026-06-09
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow non-power of two min_region_sz on damon_star...
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow non-power of two min_region_sz on damon_start() Commit d8f867fa0825 ("mm/damon: add damon_ctx->min_sz_region") introduced a bug that allows unaligned DAMON region address ranges. Commit c80f46ac228b ("mm/damon/core: disallow non-power of two min_region_sz") fixed it, but only for damon_commit_ctx() use case. Still, DAMON sysfs interface can emit non-power of two min_region_sz via damon_start(). Fix the path by adding the is_power_of_2() check on damon_start(). The issue was discovered by sashiko [1].
- CVE-2026-529042026-06-09
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix nvkm_device leak on aperture removal failure When ...
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix nvkm_device leak on aperture removal failure When aperture_remove_conflicting_pci_devices() fails during probe, the error path returns directly without unwinding the nvkm_device that was just allocated by nvkm_device_pci_new(). This leaks both the device wrapper and the pci_enable_device() reference taken inside it. Jump to the existing fail_nvkm label so nvkm_device_del() runs and balances both. The leak was introduced when the intermediate nvkm_device_del() between detection and aperture removal was dropped in favor of creating the pci device once.
- CVE-2026-497622026-06-09
Uncontrolled Resource Consumption vulnerability in the Elixir standard library's Version module allows an attacker who controls a version...
Uncontrolled Resource Consumption vulnerability in the Elixir standard library's Version module allows an attacker who controls a version string to cause a denial of service through CPU and memory exhaustion. The version parser converts numeric version components (major, minor, patch and numeric pre-release/build identifiers) to integers without bounding their length. A single large all-digit component therefore forces a super-linear, non-yielding base-10 to arbitrary-precision integer conversion (String.to_integer/1, i.e. :erlang.binary_to_integer/1) that pins a BEAM scheduler, and a larger component raises an uncaught SystemLimitError that crashes the calling process. A single moderately sized string (around one megabyte) is enough; no authentication is required. This is reachable from the public entry points Version.parse/1, Version.parse!/1, Version.match?/3, Version.compare/2, and Version.parse_requirement/1, which applications routinely call on untrusted input such as HTTP parameters, dependency-manifest fields, and package metadata. This vulnerability is associated with program files lib/version.ex and program routines 'Elixir.Version.Parser':parse_digits/2. This issue affects Elixir: from 1.5.0 before 1.20.1.
CWE-400 - CVE-2026-479012026-06-09
Logseq is vulnerable to a sandbox escape flaw where plugins running in sandboxed iframes can inject arbitrary HTML attributes, such as ev...
Logseq is vulnerable to a sandbox escape flaw where plugins running in sandboxed iframes can inject arbitrary HTML attributes, such as event handlers, into their container element in the host DOM. Due to a disabled Content Security Policy (CSP), this allows a malicious plugin to execute arbitrary JavaScript in the privileged host context, potentially gaining unauthorized access to filesystem APIs. While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch.
CWE-79 - CVE-2026-479002026-06-09
Logseq is vulnerable to a stored cross-site scripting (XSS)
Logseq is vulnerable to a stored cross-site scripting (XSS). A malicious plugin can include a JavaScript payload in the "name" field of its "package.json" file, which is rendered using "innerHTML" without proper sanitization, allowing the execution of arbitrary code in the privileged host context. While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch.
CWE-79 - CVE-2026-478992026-06-09
The Electron preload script in Logseq exposes an API method that allows the renderer process to invoke IPC handlers without proper path v...
The Electron preload script in Logseq exposes an API method that allows the renderer process to invoke IPC handlers without proper path validation. An attacker with JavaScript execution in the renderer (e.g. via XSS or a malicious plugin), can read, write, or delete arbitrary files on the user's system. While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch.
CWE-749 In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: bound bootloader receive buffering cc1352_b...
In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: bound bootloader receive buffering cc1352_bootloader_rx() appends each serdev chunk into the fixed rx_buffer before parsing bootloader packets. The helper can keep leftover bytes between callbacks and may receive multiple packets in one callback, so a single count value is not constrained by one packet length. Check that the incoming chunk fits in the remaining receive buffer space before memcpy(). If it does not, drop the staged data and consume the bytes instead of overflowing rx_buffer.
In the Linux kernel, the following vulnerability has been resolved: Revert "net/smc: Introduce TCP ULP support" This reverts commit d7c...
In the Linux kernel, the following vulnerability has been resolved: Revert "net/smc: Introduce TCP ULP support" This reverts commit d7cd421da9da2cc7b4d25b8537f66db5c8331c40. As reported by Al Viro, the TCP ULP support for SMC is fundamentally broken. The implementation attempts to convert an active TCP socket into an SMC socket by modifying the underlying `struct file`, dentry, and inode in-place, which violates core VFS invariants that assume these structures are immutable for an open file, creating a risk of use after free errors and general system instability. Given the severity of this design flaw and the fact that cleaner alternatives (e.g., LD_PRELOAD, BPF) exist for legacy application transparency, the correct course of action is to remove this feature entirely.
- CVE-2026-463292026-06-09
In the Linux kernel, the following vulnerability has been resolved: erofs: handle end of filesystem properly for file-backed mounts I/O...
In the Linux kernel, the following vulnerability has been resolved: erofs: handle end of filesystem properly for file-backed mounts I/O requests beyond the end of the filesystem should be zeroed out, similar to loopback devices and that is what we expect.
9.8 CRITICAL
8.1 HIGH
6.7 MEDIUMWeekly digest
Get the curated CVE digest every Monday
One email a week, sent Monday morning CET. The CVEs published or modified in the last seven days, severity-ordered, with the QSearch coverage signal. Unsubscribe with one click — included in every send.
Pipe the CVE feed into your stack.
CVE Watch publishes RSS, Atom, and JSON feeds — wire them into your SIEM, Slack, Discord, or your RSS reader of choice. Or get the curated weekly digest by email.